perixx PERIMICE-718 Mode D'emploi page 27

Italiano (IT)
Macro Manager
You can create a new Macro se�ng by pressing the NEW bu�on. Then you can enter the Macro name in
A and press ENTER key on the keyboard to save.
Start to record the Key Press Sequence by clicking B START RECORD bu�on and stop the recording by
pressing the bu�on again.
Your Keypress Sequence will be recorded in the middle column C and you can decide the D LOOP TIMES
repe��on rate as well.
A�er the selec�on, please press OK to save the se�ng or CANCEL to discard the se�ng and leave from
the program.
Once the Macro is recorded, you can simply press DELETE to abandon the se�ng.
A. C.
B.
D.