Foreword; Product Description - Chattanooga Group OptiFlex3 2090 Manuel D'utilisation

FOREWORD

OptiFlex® 3 Continuous Passive Motion (CPM) Therapy Unit
This manual has been written for the operators of the OptiFlex 3 Continuous Passive Motion (CPM) Therapy Unit. It contains general
instructions for operation, precautionary instructions, and maintenance recommendations. In order to obtain maximum life and efficiency
from your OptiFlex 3 CPM Unit, and to assist in the proper operation of the unit, read and understand this manual thoroughly.
The specifications put forth in this manual were in effect at the time of the publication. However, owing to Chattanooga Group's policy of
continuous improvement, changes to these specifications may be made at any time without obligation on the part of Chattanooga Group.
Before administering any treatment to a patient, you should become acquainted with the operating procedures, as well as the indications,
contraindications, warnings, and precautions.

Product Description

Continuous Passive Motion is a postoperative procedure designed to aid in patient recovery after joint surgery. This unit is typically used
postoperatively for total knee replacement and Anterior Cruciate Ligament (ACL) repairs. After extensive joint surgery, if a patient fails
to move the joint, tissue around the joint will become stiff and scar tissue will form, resulting in a joint with limited range of motion. By
repeatedly flexing and extending the affected joint through a prescribed arc of motion for an extended period of time, the OptiFlex 3 CPM
Unit lessens the adverse effects of immobilization and trauma on the knee joint.
©2005 Encore Medical Corporation or its affiliates, Austin, Texas, USA. Any use of editorial, pictorial, or layout composition of this publication without express written consent
from the Chattanooga Group of Encore Medical, L.P. is strictly prohibited. This publication was written, illustrated, and prepared for print by the Chattanooga Group of Encore
Medical, L.P.
1