Usb Firmware Upgrade - Starway BARACCA Manuel De L'utilisateur

USB Firmware upgrade :

1. Place the update files in a directory on the USB key,
In this example LUSSO:
2. Turn on the projector and go to the menu by pressing "Mode" > "Function" >
"USB Update" > "On", exit the menu and turn off the projector.
3. Projector off, DMX or WDMX disconnected, insert the USB key into the connector located
on the front panel.
4. Turn on the projector > the screen displays the available directories>
select the folder according the projector
In this example LUSSO
5. Select «Start» and press «Enter»
Page 43