Installation - Rointe SYGMA BAS Serie Manuel D'installation Et D'utilisation

3. INSTALLATION

We recommend using a trusted Rointe supplier for installation of the product. Find the
nearest one by calling us on 0203 321 5928 or using the locator on www.rointe.co.uk.
IMPORTANT: Prior to installation, please locate the metal tag located at the back of the
product and note the product reference and serial number. You will need this information
to register your guarantee. See section 9 for help on how to register the guarantee.
WARNING: Do not install the product directly over an electrical outlet or junction box.
Do not install the product or use it outdoors. Do not install directly under a shelf. This
product is designed to be installed on an interior wall using the ROINTE template, the
installation kit and the fixings supplied. Do not install the product in such a way that it
encounters the power cable.
The product must be mounted on the wall in the position shown in the accompanying image
using the brackets and with the fixings supplied.
Our products transfer heat through the natural air convection. If the product is covered, this
will disrupt the airflow and could cause overheating. It must be positioned in accordance
with the minimum distances shown in the accompanying picture.
Floor
SYGMA BAS DIGITAL RADIATOR
EN
27