Connection; Example 1: When Two Mb-X6 Or Mb-806A Units Are Connected - Sony WD-850 Mode D'emploi

Connection

Example 1: When two MB-X6 or MB-806A units are connected

50-ohm terminator
Notes
• Connect the supplied 50-ohm terminator to any
ANTENNA A/B OUT connector or ANTENNA A/B
CASCADE connector that is unoccupied. Do not
connect the terminator to an unoccupied ANTENNA A/
B IN/DC OUT connector.
• 9V DC power for the booster amplifier of the Sony UHF
antenna is supplied from the ANTENNA A and B IN/DC
OUT connectors. Take care not to short-circuit these
connectors.
• Always use a pair of antennas (A and B).
Sony UHF antenna
50-ohm terminator
MB-X6 or MB-806A
MB-X6 or MB-806A
When four antennas are connected
50-ohm
terminator
To AC power source
To AC power source
To AC power source
9
Connection