Publicité
Les langues disponibles
Les langues disponibles
1. Move power switch on handle to the
second position to engage brushroll for
carpet cleaning (Fig 1)
back and forth on area to be cleaned.
Avoid oversized or sharp items (such as
screws) with cleaner.
3. Twist wrist to engage swivel function.
4. When done, switch to off position
1. Click the dust cup release button,
located on the bottom of the dust cup
to detach it from the unit pull dust cup
out. (Fig. 2).
2. Use handle on top of dust cup to
remove lid, empty dust cup and replace
lid (Fig. 3)
3. To place dust cup back, align hooks on
dust cup to slots on body and press up
until it clicks into place (Fig. 4)
!
Aways turn off hand
vacuum before attaching accessories.
The hand vacuum can be used with or
without tools.
• To use without tools, press release
button and remove wand. Collect
debris directly with hand vacuum
nozzle.
• To use tools with wand, press release
nozzle. Slide tool onto end of wand
until it clicks (Fig. 4).
• To use tools with hand vacuum only,
press release button to remove wand.
Slide tool onto hand vacuum until it
clicks.
(continued on p. 8)
1
Power button/
speed controls
3
1. Remove lid
2. Empty
dust cup
hard-to-reach areas such
as corners, baseboard
edges, dryer vents, chairs
and sofas.
2
1. Release
latch
4
1. Align
2. Push
Click!
Cleans
www.eureka.com
2. Pull out
4
7
Publicité
