Publicité
Les langues disponibles
Les langues disponibles
G Operating Instructions
PC2TV WLAN TV Adapter
Item no. 1091683
Intended use
This product can be used to display the image of a computer/notebook on a monitor/
TV wirelessly using WLAN. The TV adapter is connected to the TV/monitor using an
analogue VGA and audio connection.
The TV adapter's power is supplied by the power adapter included in the delivery.
Always observe the safety instructions and all other information included in these op-
erating instructions.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Contents
• TV adapter
• Power adapter
• CD with the software and the comprehensive manufacturer's manual (PDF)
• Quick installation guide by the manufacturer in English
• Quick guide
Explanation of the symbols
The lightning symbol inside a triangle is a warning to inform you of potential
risks of personal injury, such as electrical shock.
This symbol indicates specific risks associated with handling, function and
use.
The "arrow" symbol indicates special tips and operating information.
Safety Instructions
T he warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any re-
sulting damage!
W e shall not accept liability for damage to property or personal injury
caused by incorrect handling or non-compliance with the safety instruc-
tions. In such cases, the warranty will be null and void.
a) General
• The unauthorised conversion and/or modification of the product is not per-
mitted for safety and approval reasons (CE). Never dismantle the product.
• Any maintenance or repair work may be only performed by an authorised
repair shop.
• Do not leave packaging material carelessly lying around, since it could
become a dangerous plaything for children.
b) Power adapter
• The design of the power adapter complies with Protection Class II. Use
only a standard mains socket as the power source for the power adapter.
The mains socket into which the power adapter is plugged must be easily
accessible.
• Use only the power adapter provided to power the TV adapter.
• Do not pull the power adapter from the mains socket by pulling on the
cable. Hold it on the sides of the casing and pull it out of the mains socket.
• If the power adapter is damaged, do not touch it; there is a danger to life
from electric shock!
First, switch off the mains voltage to the socket to which the power adapt-
er is connected (switch off at the corresponding circuit breaker or remove
the safety fuse or switch off at the corresponding RCD protective switch,
so that the socket is fully disconnected).
You can then unplug the power adapter from the mains socket. Dispose of
the faulty power adapter in an environmentally friendly way, do not use it
any more. Replace it with a power adapter of the same design.
c) Operation
• The product is not a toy. Devices operated using mains voltage do not
belong in the hands of children. Therefore, be especially careful when
children are around.
Use the product where it is out of the reach of children.
• The product is intended for use only in dry, indoor locations. No part of
the product should become damp or wet; never handle it if your hands are
wet!
Power adapters have the potential to cause a fatal electric shock!
• When setting up the product, make sure that the cable is neither kinked
nor pinched.
• Never use the product immediately after it has been taken from a cold
room to a warm one. The condensation that forms might damage the prod-
uct under certain circumstances. The power adapter also poses a risk for
a potentially fatal electric shock!
Allow the product to reach room temperature before connecting it to the
power supply and putting it to use. This may take several hours.
• Avoid the following adverse conditions at the installation location and dur-
ing transport:
- Excessive humidity or dampness
- Extreme cold or heat, direct sunlight
- Dust or flammable gases, fumes or solvents
- Strong vibrations, impacts or blows
- Strong magnetic fields such as those found in the vicinity of machinery
or loudspeakers
Software installation
• Insert the enclosed CD into an appropriate drive of your computer.
• If the installation program does not start automatically, open the CD main directory,
e.g., with with the Windows file manager. Start the program "Autorun.exe".
• Click on "PC2TVwifi" and then on "Application Software"; this will start the software
installation. Follow all of the instructions.
• After installation of the software, click on "Analysis" to check the speed of the com-
puter; then click on "Close" to close the benchmark program.
Clicking on "Product Manual" in the installation program will open the com-
prehensive (English language) manufacturer's manual (PDF format).
If you do not have a program to display PDF's, the manual cannot be opened.
Visit, for example, the website www.adobe.com and download and install
"Adobe Reader" free of charge.
• Then restart Windows.
Connection
• Connect the VGA output of the TV adapter with the VGA input of your monitor/TV
using a VGA cable.
• An audio connection is provided via a 3.5 mm cinch socket of the TV adapter, if
required. Connect this socket to the audio input of the monitor/TV using a suitable
cable.
• If the image of the computer/notebook to the TV adapter is not to be transmitted via
WLAN but via a LAN connection, connect the TV adapter with you router or switch
using a network cable.
• Connect the circular low-voltage plug of the power adapter with the corresponding
socket of the TV adapter.
• Plug the power adapter into a mains socket.
• Switch the TV adapter on with the switch at the front; the power LED of the TV
adapter is illuminated.
• After a few seconds, a start notification of the TV adapter appears on the connected
monitor/TV.
Wait for about 40 - 60 seconds; then, "Ready" is displayed as well as the current set-
tings (e.g., the IP address of the TV adapter, the WLAN channel, the encryption and
the operation mode).
The TV adapter is now ready for operation and waits for a suitable signal.
Publicité
