Sangean DT-F1/V Mode D'emploi page 9

Storing stations in preset memory
There are 9 preset memories each on area 1
and area 2 (like page 1 and page 2 on some
of car stereo receivers) in total 18 preset
memories for this radio.
Turn on the radio, tune to the desired stations
using scan and manual tuning as previously
GB
described. Press the Memory button (AREA/
M.) 2, the display will flash Preset, press
PRESET button 3 to select memory position
then press AREA/M again to complete the
memory preset.
To change PRESET area from area 1 to area
2 and vice versa, press AREA/M for more
than 3 seconds, display AREA will flash the
change, continue pressing for another 2
seconds until flash stops. The Preset area
now is changed (from Area 1 to Area 2 and
vice versa).
8