Troubleshooting; Problems, Possible Causes And Solutions - THINK GIZMOS TG20 Manuel D'utilisation

6. TROUBLESHOOTING

6.1 Problems, Possible Causes and Solutions

PROBLEM
'Add Water' Indicator is on.
'Ice' Indicator is on.
Ice cubes stick together.
Ice making cycle is normal
but no ice is made.
POSSIBLE CAUSE
Lack of Water
There is too much ice.
The ice cycle is too long.
Water temperature in inner
tank is too low.
Ambient temperature or
water temperature in inner
tank is too high.
Refrigerant liquid leakage.
Pipe in the cooling system
is blocked.
SOLUTION
Stop the ice maker, fill water,
and press "Power" button again
to restart the unit.
Remove ice from ice basket.
Stop the ice maker, and restart it
when the ice blocks melt. Select
the small size ice cube selection.
Change the water in the inner
Tank. Temperature of water is
better set between 7°C-30°C.
Please run the ice maker below
30°C and pour colder water into
tank.
Verify by a qualified technician.
Verify by a qualified technician.
9