Publicité
Les langues disponibles
Les langues disponibles
8
Introduction: Konyks Hydro Dispenser is a Smart water
dispenser that attaches to a conventional tap and allows
remote control of its operation and measures water
consumption
Konyks Hydro Hub is a smart plug supplied with the Kit.
Hydro hub connects your Wifi and relays the signal to the
Hydro Dispenser by RF (range 60m max). In addition to its
relay function, Hydro Hub can be used as a classic smart
plug
1.
Download Konyks APP by following the QR Code page 2
2.
Use a smartphone running Android or iOS
3.
Connect your Smartphone to a 2.4 GHz Wi-Fi network
only
4.
Open Konyks APP and register if you haven't already
5.
Plug in the plug and wait a few seconds.
6.
The light should flash rapidly. If this is the case go to step
7 otherwise RESET THE SOCKET by pressing the button
for 5 seconds then release → The socket flashes slowly (AP
mode) -> Press the button again for 5 seconds then
release → the socket flashes quickly (EZ mode)
QUICK
INSTALLATION
Publicité
