LEXIBOOK TM 230 Mode D'emploi page 17

17. Unit conversion
Perform a conversion
1. Press four times. First unit conversion is displayed inch
conversion rate 2.54. There are 8 pre-stored unit conversions.
2. Press or arrows to select desired conversion. Ex : mile
3. Tap amount to convert.
If it is a mile amount, press to view km result.
If it is a km amount, press to view mile result.
Available unit conversions:
inch cm (inches and centimeters) ; yard
mile km (miles and kilometers) ; C F (Celsius and Fahrenheit) ;
ft m (feet and meters) ; oz g (ounces and grams) ; lb
and kilograms) ; gal l US (US gallons and litres) ; gal
gallons and liters)
18. Reset
This operation will delete all your data and your password.
1. Insert a blunt pin, such as an opened paper clip, in RESET hole at the rear of
the unit and press gently Display shows RESET?
2. Press to confirm or any other key to escape.
19. Memory check
1. Press once to view home time ( symbol on first line).
2. Press to display numerical keypad and there press MENU. LANGUAGE ?
option is displayed.
3. Use or arrows to select MEMORY CHECK and press
4. Display shows how many free bytes are left then returns to home time.
20. PC Synchronisation
Before synchronising
Prior to performing your first synchronisation, make sure that Lexibook
SyncMan ® software is installed on your PC. Insert the CD included in your
pack. The SyncMan installation menu will start automatically. Follow the
screen prompts to install the software.
1. Connect the cable, included with your unit, to a free PC Com Port then insert
cm with its
cable jack into the unit's socket (on top left side)..
2. Start SyncMan ®
km
mode is set up for TM230 Series Personal Assistants by clicking on Tools,
Options then Your Device tab.
3. Set up PC Com Port in SyncMan
Synchronisation tab. Make sure also that automatic connection is
ticked off.
m (yards and meters) ; Perform synchronisation
1. Once SyncMan
kg (pounds press once to display home (
l UK (UK
2. Press to start Synchronisation. Alternatively you can press MENU then
select PC SYNCH. option and press
3. Display shows LINKING ... During synchronisation.
If you have set up a password, you will be required to enter it at this time to
perform synchronisation.
21. Lexibook SYNCMAN
SyncMan ® UPGRADE downloading
1. Go to https://my.lexibook.com web site and register as new member.
2. You will get by return an activation e-mail to make your account active. Click
on the activation link included in this e-mail.
3. Then go back to https://my.lexibook.com and enter your user name and
password, this will take you to your account home page, you will find a link
to download Lexibook SyncMan
to confirm.
Required PC configuration
Your PC must have following configuration to run Lexibook SyncMan
software properly :
• Windows ® 95, 98, Millennium, 2000 & XP or Windows NT
• Microsoft ® Internet Explorer version 5.0 or above.
® • 32MB RAM (for Internet Explorer).
GB 6
software on your PC and check whether synchronisation
® by clicking on Tools, Options then
® has been started and your unit connected to your PC,
symbol on first line).
.
® software
® upgrade software free.
® 4.0 .
®