Before You Start; Installation - Samsung AIRDRESSER DF10 9 G Serie Manuel D'utilisation

Before you start

Installation

Install the product according to the instructions in this manual and local codes.
Installing the product
1. Select a solid, level location with adequate space for the following clearances.
Top
Sides
Rear
- If the minimum clearances are not met, performance will decrease due to poor ventilation and
condensation may occur on the product exterior.
- Do not install the product in direct sunlight or in an area that is too hot or too cold. The ambient
temperature must be between 10 °C - 35 °C. If the ambient temperature is too high or too low, the
product may not operate normally, or performance may decrease.
A
B
Untitled-4 11
25 mm
14 mm
15 mm
2. Turn the levelling feet (A) clockwise or
counterclockwise to adjust the height until the
product is level.
NOTE
If the product wobbles or if you want to raise the
height of the rear side, assemble the provided rear
levelling feet (B) on the bottom-rear sides of the
product.
English 11
2021-07-16 11:50:00