Télécharger Imprimer la page

Publicité

Liens rapides

ASSEMBLY INSTRUCTION /INSTRUCTIONS D'ASSEMBLAGE
Item No : 5400-24
Description : COUNTER HEIGHT CHAIR /CHAISE HAUTEUR
COMPTOIR
COMPONENT LIST / LISTE DES PIECES
NO
DESCRIPTION
1
BACK REST /DOSSIER
2
SEAT FRAME /CADRE DE SIÈGE
LSF FRONT LEG /PIED AVANT
3
(GAUCHE)
RSF FRONT LEG /PIED AVANT (DROIT)
4
5
CUSHION (COUSSINÉ)
FRONT STRETCHER/BARREAU AVANT
6
7
LSF SIDE STRETCHER/BARREAU
LATÉRAL DE COTE (GAUCHE)
8
RSF SIDE STRETCHER/BARREAU
LATÉRAL DE COTE (DROIT)
NOTE : YOU WILL ALSO NEED A PHILIP SCREW DRIVER (NOT PROVIDED)
VOUS AUREZ ÉGALEMENT BESOIN D'UN TOURNEVIS PHILIP (NON FOURNI)
STEP 1 / TAPE 1
G
E
C
D
STEP 2 /
APE 2
It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing furniture on a wood floor or other hard surface, and
to limit indentation and prevent discoloration if placing on carpet.
Il est recommande de placer des coussins protecteurs sous tous les pieds et toutes les bases des meubles pour eviter d'endommager ou d'egrantigner les planchers en
bois ou autress surfaces dures, et pour limiter l'empreinte et empecher la decolorations quand les meubles reposent sur la moquette.
MADE IN MALAYSIA / FABRIQUÉ EN MALAISE
IMPORTANT NOTE :
1. Place all wooden parts on a clean and smooth surface such as a rug or a carpet
to avoid the parts from being scratched.
2. Check that you have all parts and hardware before assembly.
3. Remove all wrapping materials including staples and packing straps before you
start to assemble.
4. Do not tighten all screws / bolts until all completely assembled.
5. Keep all hardware parts out of reach of children.
NOTES IMPORTANTES :
1. Placer toutes les pieces de bois sur une surface propre et lisse comme un tapis
on une moquette pour eviter de rayer les pieces.
2. Verifiez avant le montage que vous avez toutes les pieces et fixations.
3. Retirez tous les materiaux d'empaquetage et d'emballage notament agraffess,
sangles avant de commencer a assembler.
4. Ne pas serrer toutes les vis/boulon jusqu'a ce que completement assemble.
5. Garder toute la quincaillerie hors de la portee des enfants.
QTY/PCS
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
2
1
2
1
7
HARDWARE LIST / LISTE DE QUINCAILLERIE
NO
DESCRIPTION
A
BOLT / BOULON M6 x 70
B
BOLT / BOULON M6 x 50
C
BOLT / BOULON M6 x 40
SPRING WASHER /
D
RONDELLE D'ARRET 1/4"
E
FLAT WASHER /
RONDELLE PLATE 1/4" x 19
F
CSK SCREW / VIS M4 x 38
G
ALLEN KEY / CLÈ ALLEN M4
G
A
E
D
8
F
QTY/PCS
4 PCS
4 PCS
2 PCS
10 PCS
10 PCS
12 PCS
1 PC
1 OF 2

Publicité

loading

Sommaire des Matières pour Homelegance 5400-24

  • Page 1 ASSEMBLY INSTRUCTION /INSTRUCTIONS D'ASSEMBLAGE Item No : 5400-24 Description : COUNTER HEIGHT CHAIR /CHAISE HAUTEUR COMPTOIR IMPORTANT NOTE : 1. Place all wooden parts on a clean and smooth surface such as a rug or a carpet to avoid the parts from being scratched.
  • Page 2 /INSTRUCTIONS D'ASSEMBLAGE ASSEMBLY INSTRUCTION Item No : 5400-24 Description : COUNTER HEIGHT CHAIR /CHAISE HAUTEUR COMPTOIR STEP 3 / TAPE 3 STEP 4 / TAPE 4 It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing furniture on a wood floor or other hard surface, and to limit indentation and prevent discoloration if placing on carpet.