Leuze BCL 600i Mode D'emploi page 17

NOTE
Do not modify or otherwise interfere with the device!
 Do not carry out modifications or otherwise interfere with the device.
The device must not be tampered with and must not be changed in
any way.
The device must not be opened. There are no user-serviceable parts
inside.
 Repairs must only be performed by Leuze electronic GmbH + Co.
KG.
Competent persons
Connection, mounting, commissioning and adjustment of the device must only be
carried out by competent persons.
Prerequisites for competent persons:
- They have a suitable technical education.
- They are familiar with the rules and regulations for occupational safety and
safety at work.
- They are familiar with the technical description of the device.
- They have been instructed by the responsible person on the mounting and op-
eration of the device.
Certified electricians
Electrical work must be carried out by a certified electrician.
Due to their technical training, knowledge and experience as well as their familiarity
with relevant standards and regulations, certified electricians are able to perform
work on electrical systems and independently detect possible dangers.
In Germany, certified electricians must fulfill the requirements of accident-preven-
tion regulations DGUV V3 (e.g. electrician foreman). In other countries, there are
respective regulations that must be observed.
Exemption of liability
Leuze electronic GmbH + Co. KG is not liable in the following cases:
- The device is not being used properly.
- Reasonably foreseeable misuse is not taken into account.
- Mounting and electrical connection are not properly performed.
- Changes (e.g., constructional) are made to the device.
EN
17