Hoover WH20400 Serie Guide D'utilisation page 10

Masquer les pouces Voir aussi pour WH20400 Serie:
Table des Matières

Publicité

Before you begin cleaning:
Filling the twin tanks
WARNING
!
To reduce the risk of personal injury -
Unplug the steam cleaner when filling the
water and solution tanks.
Do not use hot or boiling water to fill
water tank.
• IMPORTANT •
DO NOT MIX HOOVER
®
4X STEAM
MULTI-FLOOR CLEANING SOLUTION
WITH ANY OTHER CLEANING SOLUTION.
• IMPORTANT •
If you don't want to use solution on
your flooring, select "STEAM
ONLY" setting.
Always test on an inconspicuous area
of flooring first before using solution.
7
!
1
Press the release button
on top of the tank.
• IMPORTANT •
DO NOT ADD SOLUTION TO
WATER TANK.
Solution
Water
2
Twist the cap counter-
clockwise to remove.
NOTE: When the tank is turned
upright it may allow a few drops to
drip from cap. This is normal.
3
Fill the water tank to fill
line. Replace the water
cap and twist clockwise
until secure.

Publicité

Chapitres

Table des Matières
loading

Table des Matières