weltico SKIMFILTRE A300 Notice D'utilisation page 7

REMOVING THE FILTERING CARTRIDGE :
1 - Close the Skimfiltre hole using the blue closure plate and keep the pump running.
2 - Remove the cage and wait until the water tank is empty.
Turn off the pump and remove the cartridge by its handle.
SERVICING THE FILTERING CARTRIDGE :
Filtering is accomplished by a high-capacity folded cartridge with a filtering fineness of 15 microns.
These cartridges are available in five sizes. Clean the cartridge on the average once a month depending
on how frequently the swimming pool is used and the selected filter's size.
The cartridge service life is approximately two seasons depending on how often it is used and the cleaning
frequency.
Clean the cartridge using a water spray and a soft bristle brush. If the cartridge is very dirty or scaly, soak the
cartridge in a detergent or filter scale remover solution.
We recommend using a set of two cartridges to prevent immobilizing
the filter during the cleaning operation.
REINSTALLING THE FILTERING CARTRIDGE :
1 - Remove the blue closure plate so that the tank can be filled.
2 - Replace the cartridge in the tank making sure that it is clipped in correctly.
3 - You can turn on the pump again.
WINTERING THE CARTRIDGE
1 - To remove the basket and the filter unit.
2 - Clean them as previously shown.
3 - TDry them.
4 - Store them in a dry place.
5 - For the wintering of the filter assembly, refer to the filtering instructions.
EN
7