Epson BO-QC350 Guide De L'utilisateur page 10

Attaching/Removing the Magnet Case
JA
You need to attach the magnet case to charge the controller using this device.
Attaching the Magnet Case
EN
A Connect the USB attachment to the con-
FR
troller's micro-USB connector.
Make sure you connect the USB attachment in the
DE
correct direction.
NL
IT
ES
PT
Removing the Magnet Case
DA
A When connecting to the headset, discon-
nect the controller connector.
FI
NO
SV
CS
HU
CAUTION
PL
Make sure you disconnect the controller connector first.
If you lift the connector and cable to remove the magnet case
RU
while the connector is connected, the connected part may break,
and you will not be able to use the controller.
UK
KK
TR
AR
SC
TC
KO
HE
10
B Place the controller in the magnet case.
B Lift the protruding section near the head-
set connector to remove the controller.
C Remove the USB attachment.