Lubrication - Klarfit Pacemaker X3 Mode D'emploi

Trottoir roulant
Masquer les pouces Voir aussi pour Pacemaker X3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
30

LUBRICATION

Lubrication under the treadmill provides superior performance and extends
the life of the unit. Apply some lubricant after the first 25 hours of operation
(or after 2-3 months) and repeat the process every 50 hours of operation (or
after 5-8 months).
Applying lubricant
Lift one side of the treadmill. Put some lubricant under the centre of the
treadmill on the top of the running deck. Switch on the machine and let it run
at low speed for 3 - 5 minutes so that the lubricant is evenly distributed.
Note: Never apply too much lubricant. If excess lubricant runs out, wipe it
off immediately.
Checking the treadmill for correct lubrication
Lift one side of the treadmill and touch the top of the running deck. If the
surface is smooth, no further lubrication is required. When the surface is dry,
apply some lubricant.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

100263851002638610026387

Table des Matières