Honda VTX1800C Mode D'emploi page 2

INSTALLATION
1. Install the meter visor. (VTX1800F only)
ISOPROPYL ALCOHOL
Thoroughly clean the area
where the meter visor will be
attached.
2. Remove the bolts as shown.
BOLT (Reuse)
Only for motor-
cycles equipped
with the front fork
BOLT (Save)
cover.
2 of 8
All manuals and user guides at all-guides.com
METER VISOR
Remove the adhesive
backing before attaching.
BOLT (Reuse)
Only for motor-
cycles equipped
with the front fork
cover.
08R80-MCH-3000-9C
3. Install the upper stay as shown.
Side View
TOP BRIDGE
HEADLIGHT
UPPER
STAY
BOLT (Reuse)
8 mm FLANGE BOLT
BOLT (Reuse)
Route the throttle cables, install the hose guide as shown.
HOSE GUIDE
© 2004 American Honda Motor Co., Inc - All Rights Reserved.
UPPER STAY
THROTTLE CABLES
UPPER STAY