Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Selecting zoom speed limit
Turn zoom speed limit knob clockwise to set higher zoom speed limit.
Turn the knob in opposite direction to set lower speed limit.
variable mode zoom
Rotate the knob right (or left, dependent on the zoom direction) to zoom
tele.
The more angle the knob is rotated the faster zoom speed is.
Zoom speed is limited to pre-set speed (see "Selecting zoom speed limit").
Rotate the knob left (or right, dependent on the zoom direction) to zoom
wide.
The more angle the knob is rotated the faster zoom speed is.
Zoom speed is limited to pre-set speed (see "Selecting zoom speed limit").
Record start/stop
Press the button once to start recording.
Press the button again to stop recording.
RET function
Press the button to execute RET function.
Customizing zoom direction
To change the zoom direction, move zoom direction switch, found on the
right side of the controller body, to opposite position.
GB
PRECAUTIONS
water Resistance
We put a lot of attention on making the controller to be as much water
resistant as possible, while maintaining its reasonable price.
However we cannot guarantee 100% water resistance under all
circumstances and you should avoid using the controller under heavy
environment conditions like rain and over 95% humidity level.
The control is supplied with rain cover.
High temperature
Avoid temperatures exceeding +70°C – especially do not leave the
controller exposed for direct contact with heavy sun shines, e.g. in the car
parked in sunny place.
OPERATING SPECIFICATIONS
Operation temperature range
Storage temperature range
Humidity rel. (non condensing) max. 95%
DISCLAIMER
The information contained in this document is subject of change without
notice.
Manfrotto makes no warranty and shall not be liable for any errors on
information contained in this document.
6
0° - +50°
-30° - +80°
Publicité
