Oceanic OCEA32HD214B3 Mode D'emploi page 36

Installation Menu Contents
Automatic channel Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
scan (Retune) Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
Manual Channel
This feature can be used for direct broadcast entry.
Scan
Network Channel Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network
Scan channels. Digital Cable: Searches for cable network channels.
Analogue Fine
You can use this setting for fine tuning analogue channels. This feature is not available if no analogue
Tune
channels are stored.
Displays installation settings menu. Standby Mode Search(*) : Your TV will search for new or missing
channels while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*)
Installation
: If this option is set as Enabled, the changes on the broadcasts such as frequency, channel name,
Settings (Optional)
subtitle language etc., will be applied automatically while watching.
(*) Availability depends on model.
Use this setting to clear channels stored. This setting is visible only when the Country option is set
Clear Service List
to Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be listed in the
Network channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related informations such as signal level/quality, network
Signal Information
name etc for available frequencies.
First Time
Deletes all stored channels and settings, resets TV to factory settings.
Installation
English - 14 -