Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. Maintenance

GB
Filling in Water
Make sure the power is off. Take off the upper body, and fill water into the transparent tank.
Make sure to fill the water no higher than the «MAX» level and no lower than the «MIN» level
marked on the outside of the tank. Then take the upper body and put it in the right place.
Do not let water get into the upper body of the appliance. If there is water on the appliance
when taking off the upper body, you must put the upper body vertically or in an inclined posi-
tion, place it on a dry towel or use a towel to dry the body of the appliance. Do not put the
appliance on its back in order to avoid water flowing into the body of the appliance and thus
shorten its operating life.
right
Draining and Cleaning
Please change the water in time when it has not been used for a long time or if it is contami-
nated. The steps are as below:
Turn off the power and unplug the appliance.
Take off the upper body.
Pour the dirty water from the inside of the tank and clean the tank. If necessary, you may
also add some detergent into the water for cleaning purposes.
Take the upper body and put it in the right place.
The appliance only needs cleaning every 3 months.
Notice:
The water-washing system will not work if there is not enough water filled in, so please
add water above the "MIN" level before turning on the appliance.
The appliance should be placed on a level surface. When carrying, please hold the bottom
firmly.
Clean the surface of the body with a cloth.
Make sure nothing is put above the airflow outlet.
The appliance has a humidifying function. If your room is already very moist please choose
airflow at a low speed or turn off the appliance.
If the appliance is not used for a long time, empty the water and keep the tank dry.
wrong
26

Publicité

Table des Matières
loading

Table des Matières