Publicité
Before cleaning, make sure the power has been turned off at the circuit breaker panel and that the
heating element of the heater is cool
1
Every heater should be inspected before each use, and at least annually by a
qualified service person
2
The appliance must be kept clear and free from combustible materials,
gasoline and other flammable vapors, and/or liquids
3
The flow of ventilation air must not be obstructed. Be sure to check the fan assembly and
ensure the motor and blade are operating properly
4
Compressed air may be used to keep components free of dust and dirt
build up.
Any non-routine maintenance must be performed by an authorized service representative.
Pre-Start Checklist
Heater must be level and lockable wheels must be in the locked position
1
Make sure fan switch and heat selection switch are in the "OFF"
2
position.
Make sure the air intake is free from any obstruction(s)
3
Make sure the heater outlet is free from any obstruction(s)
4
Make sure the heater is properly grounded
5
Check power supply voltage and amps.
6
MAINTENANCE
WARNING
6
Publicité
