Power Monitoring And Charging The Batteries; Screen Lock; Connecting With Computer And Data Transfer - Ricatech TAB10-06 Mode D'emploi

All manuals and user guides at all-guides.com

Power monitoring and charging the batteries

The battery charge symbol in on the status bar indicates
the charging status of the batteries.
If the power goes down, the device shuts itself off automatically.
If less power is shown, use the power adapter or a computer
via USB to charge the device.
The charging time for the battery is approximately four hours.

Screen lock

If the device is not used for specified time or the 'Power' button
is pressed briefly, the screen is switched off and display lock
is activated.
By pressing the 'Power' button briefly the screen will be reactivated.
For locking the screen press the 'Lock' button in the specified
direction.
Connecting to the computer and data transfer
EasyPad is equipped with a High-Speed USB2.0 Interface.
After you connect the device to a computer, it appears in
.
the status display
Pull the status bar down and press 'USB Connection' to activate
the USB Memory. When using the device for data transfer,
you cannot access the Micro SD/TF Card from EasyPad!
5