Operation - Etekcity EM-SN8 Mode D'emploi

Operation

Quick Start
1. Connect an adapter to the massager.
[Figure 1.1]
2. Plug the connected adapter into a powered
electrical outlet.
3. Position the massager on the desired area. If
necessary, put your arms through the arm straps
to gently apply pressure with the massager onto
your body. (See the Common Areas of Use
section on page 9.)
4. Press ' ' to turn on the massager.
NOTE:
• Please note that the massager will automatically
turn off after 15 minutes. If you want to keep
using the massager, simply press '
back on.
• DO NOT use the massager for more than 30
consecutive minutes.
• DO NOT use the massager while driving/
operating automobiles, buses, campers, or boats.
' to turn it
The adapter will
snap together.
Figure 1.1
E N
7