EN
Getting Started • Warning
Turn off power
2
existing thermostat.
Double Check - After you turn off the breaker
the heater is off by doing the following:
- Turn the thermostat all the way up.
- Wait 5-10 minutes.
- Put your hand near the heater. Make sure no heat
is coming through. If you have multiple heaters check
each separately.
heater is off, please contact a licensed electrician.
Remove your existing thermostat.
3
if there are wire nuts connecting the thermostat wiring.
at the circuit breaker that controls your
If you are unsure if the power to your
Only proceed with the installation
confirm
7