Default Parameters; Specifi Cations For The Download - Carel 2N Manuel D'utilisation

Default parameters

Parameter
• probe 1 high temperature alarm
• probe 1 low temperature alarm
• probe 1 temperature delay alarm
• probe 2 high temperature alarm
• probe 2 low temperature alarm
• probe 2 temperature delay alarm
• probe number
• sampling period
• password
• buzzer
• digital input 1
• digital input 2
• temperature
• open door delay alarm
• blackout alarm
• relay
• probe 1 text
• user name
Specifi cations for the Download
It is possible to transfer the data concerning the temperatures to be fi led (by means of a PC or printer) by utilizing an appropriate
module connected to the Datalogger: the CAREL Download module (code DLOGSER000). If this does not happen, after a period
of time higher than one year, the Datalogger begins the overwrite of the old data in order to place the new ones (see the mask"
Available storage" in the "INFORMATION MODE"). The dumping of the data takes place through a telephone dial. Once the serial
connection has been established, press simultaneously the
Download is displayed.
When pressing the button the transfer of the data recorded by the previous Download starts. When pressing the
button the Download of the whole storage starts. If the buttons have been pressed before connecting the Download module, the
following warning appears on the display:
If, on the contrary, the connection has already been carried out during the button pressure, the transmission starts immediately.
The Download operation starts after an acoustic signalling and the mask below appears:
Default value
50 °C
-50 °C
30 minutes
50 °C
-50 °C
30 minutes
1
15 minutes
15
ON
disabled
disabled
°C
60 minutes
disabled
normally open
room1
--------
and . Now a mask for the choice of the established type of
From last D.L.
All data log.
Connection fail.
Downloading...
25 %
Tab. 2