Lehner Versand ZHQ2125-RMLED-B Instructions D'utilisation page 20

This unit is equipped with one On I Off switch.
Remote control
F. Press the On/Off switch to activate the heater
G. To operate the heater on low power (800W), press on the
left side button of the remote control
H. To operate the heater on medial (1000W), press on the
right side button of the remote control
I. Press on both the left and right side button of the remote
control for maximum power (1800W)
J. To operate the LED light, press the top button of the
remote control
Operation of Touch Switch
 Press the On/Off switch to activate the heater
 Touch the touch switch once to operate the heater on
800W power.
 Touch the touch switch twice to operate the heater on
1800W power.
 Touch the touch switch third times to activate the LED
light without heat.
 Touch the touch switch four times to operate the LED light
and to operate the heater on 1800W power.
 Touch the touch switch five times to shut off the light and
heat.
MAINTENANCE
Unplug the unit and let it cool completely.
 To keep the heater clean, the outer shell may be cleaned with
a soft, damp cloth. You may use a mild detergent if necessary.
After cleaning, dry the unit with a soft cloth.
 DO NOT use alcohol, gasoline, abrasive powders, furniture
polish, or rough brushes to clean the heater. This may cause
damage or deterioration to the surface of the heater.
 Although this heater is outdoor approved, DO NOT immerse
the heater in water for your safety.
Wait until the unit is completely dry before use.
STORAGE
If the heater will not be used for a long period of
time, store it in a cool, dry location when not in use. To prevent
dust and dirt build-up, use the original packaging to repack the
unit.
20