Objets; Types D'objet Pris En Charge - HMS Networks Intesis BACnet Manuel D'utilisation

Masquer les pouces Voir aussi pour Intesis BACnet:
Table des Matières

Publicité

Serveur BACnet – PANASONIC VRF
Intesis
TM

5 Objets

5.1 Types d'objet pris en charge

Les objets pris en charge sont indiqués dans le tableau ci-dessous.
Type d'objet
Entrée analogique (Analog-Input)
Sortie analogique (Analog-Output)
Valeur analogique (Analog-Value)
Moyenne (Averaging)
Entrée binaire (Binary-Input)
Sortie binaire (Binary-Output)
Valeur binaire (Binary-Value)
Calendrier (Calendar)
Commande (Command)
Dispositif (Device)
Inscription événement (Event-Enrollment)
Fichier
Groupe (Group)
Point de sécurité des personnes (Life-
Safety-Point)
© HMS Industrial Networks S.L.U – Tous droits réservés
Ces informations peuvent être modifiées sans préavis
ID
Pris en
Point de gestion
charge
LXOUXX_Demand Limit. Ratio_S
LXOUXX_High Pressure Sensor
LXOUXX_Low Pressure Sensor
LXOUXX_Working Time
LXOXXUXX_Setpoint_S
LXOXXUXX_Room Temperature
LXOXXUXX_Disch.Setpoint Cool_S
LXOXXUXX_Disch.Setpoint Heat_S
LXOXXUXX_Disch.Current Temp.
LXOXXUXX_Heat Exchanger Temp.
LXOXXUXX_Heat Setpoint Up Limit
0
LXOXXUXX_Heat Setpoint Low Limit
LXOXXUXX_Cool Setpoint Up Limit
LXOXXUXX_Cool Setpoint Low Limit
LXOXXUXX_Dry Setpoint Up Limit
LXOXXUXX_Dry Setpoint Low Limit
LXOXXUXX_Auto Setpoint Up Limit
LXOXXUXX_Auto Setpoint Low Limit
LXOXXUXX_Unit Error Code
LXOXXUXX_Consumption Yesterday
LXOXXUXX_Consumption Today
LXOXXUXX_Consumption Total
Température de consigne (toutes les unités)
LXOUXX_Demand Limit. Ratio_C
LXOXXUXX_Setpoint_C
1
LXOXXUXX_Bacnet ambient temperature
LXOXXUXX_Disch.Setpoint Cool_C
LXOXXUXX_Disch.Setpoint Heat_C
Point de consigne de refroidissement d'occupation
Point de consigne de chauffage d'occupation
2
Point de consigne de refroidissement de non-occupation
Point de consigne de chauffage de non-occupation
18
LXOXXUXX_On/Off_S
LXOXXUXX_Wired Remote Controller_S
LXOXXUXX_Filter Sign
3
LXOXXUXX_Allow On/Off from RC_S
LXOXXUXX_Allow Mode from RC_S
LXOXXUXX_Allow Setpoint from RC_S
Marche/arrêt (toutes les unités)
LXOXXUXX_On/Off_C
LXOXXUXX_Wired Remote Controller_C
4
LXOXXUXX_Filter Reset
LXOXXUXX_Allow On/Off from RC_C
LXOXXUXX_Allow Mode from RC_C
LXOXXUXX_Allow Setpoint from RC_C
5
Action de bande morte de non-occupation
6
7
8
Appareil INBACPAN---O000
9
10
11
21
Manuel d'utilisation r1.1 FR
URL https://www.intesis.com
16 / 107

Publicité

Table des Matières
loading

Table des Matières