Télécharger Imprimer la page

Cooper Lighting Solutions Metalux WaveLinx Instructions D'installation

Détecteur intégré industriel

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

IB507018EN
Installation Instructions – Industrial WaveLinx Integrated Sensor
Instructions d'installation – Détecteur intégré industriel WaveLinx
Instrucciones de instalación – Sensor integrado industrial WaveLinx
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this
product must be performed by a qualified electrician. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of
the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or
attempting any maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property
damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind
that may arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Green ground screw provided in proper location. Do not relocate.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on
delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
WARNING
Brand Logo
reversed out of
black
Metalux
INS #
INS #

Publicité

loading

Sommaire des Matières pour Cooper Lighting Solutions Metalux WaveLinx

  • Page 1 Failure to comply with these instructions may result in death, serious bodily injury and property damage. DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
  • Page 2 To install, insert sensor and rotate clockwise until Place mask over lens and reinstall sensor cap using the detent felt. (Figure 3.) slots for alignment. (Figure 6.) Place Mask Over PIR Lens Line up Slots to Reinstall Figure 3. Figure 6. COOPER LIGHTING SOLUTIONS IB507018EN Installation instructions...
  • Page 3 Installation Instructions – Industrial WaveLinx Integrated Sensor Remove mask wedges to achieve desired coverage shape. (Figure 7 .) Remove Wedges on Mask to Achieve Desired Coverage Shape Figure 7. COOPER LIGHTING SOLUTIONS IB507018EN Installation instructions...
  • Page 4 La désobéissance aux instructions suivantes représente un risque de blessures graves ou mortelles et de dommages matériels. EXONÉRATION DE RESPONSABILITÉ : Cooper Lighting Solutions n’assume aucune responsabilité pour les dommages ou pertes de toute nature pouvant découler d’une installation inappropriée, imprudente ou négligente et d’une mauvaise manipulation ou utilisation de ce produit.
  • Page 5 Utilisez la fente pour enlever le dessus Retirez les coins du masque pour obtenir la forme de Figure 4. couverture souhaitée Insérez l’outil dans la fente pour retirer le capuchon du détecteur. (Figure 5.) Figure 7. Figure 5. COOPER LIGHTING SOLUTIONS IB507018EN Instructions d’installation...
  • Page 6 El incumplimiento de estas instrucciones puede ocasionar la muerte, lesiones corporales graves y daños a la propiedad. RENUNCIA DE RESPONSABILIDAD: Cooper Lighting Solutions no asume ninguna responsabilidad por daños o pérdidas de ningún tipo que puedan surgir por la instalación, manipulación o uso inadecuado, descuidado o negligente de este producto.
  • Page 7 Retire las cuñas de la Figura 4. máscara para lograr la forma de cobertura deseada Use la herramienta en la ranura para quitar la tapa del sensor. (Figura 5.) Figura 7. Figura 5. COOPER LIGHTING SOLUTIONS IB507018EN Instrucciones de instalación...
  • Page 8 Garanties et limitation de responsabilité Veuillez consulter le site www.cooperlighting.com pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com para conocer nuestros términos y condiciones. Cooper Lighting Solutions is a registered trademark. Cooper Lighting Solutions All trademarks are property 1121 Highway 74 South Peachtree of their respective owners.