BASETech 1497350 Notice De Montage page 3

Assembly instructions
Heavy-duty rack 175 kg
Item no. 1497350
Intended use
The product is intended for storing loads of up to 175 kg per shelf. The shelves can
be mounted at different heights.
For safety and approval purposes, you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may
be damaged. Improper use can furthermore cause hazards such as injuries. Read
the assembly instructions carefully and keep them. Make this product available to
third parties only together with its assembly instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• 4x connector
• 5x traverse
• 5x shelf
• 8x foot
• 8x upright brace
• 10x longitudinal brace
• 10x cross brace
• Assembly instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/
downloads or scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important
instructions contained in these operating instructions that must be followed.
Safety instructions
Read the assembly instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this assembly instructions, we
assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• To handle heavy loads, ask another person for help, in order to avoid
injuries (e.g. back injuries).
• Verify that the delivery content is complete before assembling the product.
Do not assemble the product if the delivery content is not complete.
• Exercise caution when assembling the product! The product has some
sharp corners which pose a risk of injury! There is also a risk of your
fingers getting caught.
• Only carry out the steps required for assembly. Never attempt to modify
or repair the product. Do not make any modifications.
• Perform the installation very carefully. Malfunctions can cause expensive
consequential damage; there is also a risk of injury.
• Do not overload the product. Observe the "Technical data".
• Distribute the load on the product as evenly as possible.
• Always observe the maximum load capacity of the surface.
• Place the product on a flat, stable surface only.
• Do not use the product as a climbing aid, e.g. as ladder.
• Check the functioning of the product before starting to work.
• In case of doubt, do not install the product yourself; have a professional
do it for you.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Contact an expert if you are in doubt regarding the function, safety or
installation of the product.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these assembly
instructions, contact our technical support service or other technical
personnel.
Installation
• Refer to the illustrations in these assembly instructions.
• Use the following, additional accessories:
- Work gloves
- Mallet
- Flat screwdriver
Cleaning and care
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other
chemical solutions since these can penetrate the housing or impair functionality.
• Use a dry, soft and clean cloth for cleaning.
Disposal
At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of
the environment.
Technical data
Load-bearing capacity ............ 175 kg per shelf
Shelf thickness ....................... 5 mm
Brace thickness ...................... 0.8 mm
Operating/storage conditions .. -20 to +60 ºC, 5 – 90 % RH
Dimensions (W x H x D) ......... 900 x 1800 x 400 mm
Weight .................................... 15 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE. *1497350_V1_1016_02_IPL_m_en