Commissioning; Display Overview - Klarstein OLD MARSHALL Mode D'emploi

EN
10

COMMISSIONING

Before fi rst operation
• Connect the power supply unit on the back of the watch winder and switch the
device on at the on/off switch.
• The integrated battery will be charged as soon as you connect the power
supply. For the fi rst use, the battery should be charged for 15 hours.
• The battery can run for 50 hours for 5 minutes and rest for 15 minutes.
Inserting and changing batteries
• Remove the 4 screws on the bottom of the watch winder.
• Loosen the 4 clips and change the battery.

DISPLAY OVERVIEW