Publicité
Les langues disponibles
Les langues disponibles
Bypass Mode
1.
Connect an audio source device (TV, computer, DVD player, CD player, or MP3
player) to the BR-O8 3.5mm audio input or optical input with the included 3.5mm
audio cable or optical cable
2.
Connect your wired audio equipment (wired headphones, speaker, or stereo
system) to BR-O8 3.5mm audio output or optical output with a 3.5mm audio cable
or optical cable
3.
Connect the BR-O8 to a power source with the micro-USB cable
4.
Slide the Power/Mode switch to "BYPASS" position
5.
Tap
to select the audio input mode "AUX" or "OPT"
6.
Once connected, you can enjoy boosted sound from your wired audio equipment
Note
●
Only one of each cable type is included, so you will need to use two different
cable types to connect your two devices to BR-O8 (or supply a second cable if
you want to use two the same). If your connected audio equipment has left &
right channel RCA outputs (colored white and red respectively), you can also use
the included RCA cable to connect
- 07 -
Publicité
