Important Remark; Warnings; Introduction - Ecler AUDEO SB10P21 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. IMPORTANT REMARK

Congratulations! You are the owner of a carefully designed and manufactured equipment. We
thank you for trusting in us and choosing our AUDEO Series loudspeaker cabinets.
In order to get the optimum operation and efficiency from this unit, it is VERY IMPORTANT -
before you plug anything - to read this manual very carefully and bear in mind all considerations
specified within it. We strongly recommend that its maintenance be carried out by our Authorised
Technical services.

2. WARNINGS

This equipment does not contain any parts that can be adjusted by the user.
Do not use this appliance near water.
Do not expose the equipment to splashes.
Do not place receptacles containing water on them.
Do not place the equipment near heat sources, spotlights or stoves.
Use only the accessories specified by the manufacturer that are appropriate for each connection.
To ensure effective protection against fire risks, replace the fuse by another of the same type as
indicated on the unit cover.

3. INTRODUCTION

The AUDEO Series acoustic cabinets is the result of a profound analysis of present and future
needs for playing music and announcements. Some of the most evident and direct applications for the
AUDEO cabinet are shops, department stores, schools, conference rooms, hotels, industries, offices,
museums, halls, hospitals, leisure areas, etc.
In some of these applications, it's necessary to have at the same time a set of "full range"
speakers and a reinforcement device for the lower end of the audible spectrum, i.e. sub-bass sounds.
Such a combination is known as 2.1 audio set (1 stereo output + 1 mono output for the subwoofer).
The AUDEOSB10P21 is a compact powered 2.1 device, including in a single enclosure a
powered subwoofer and a stereo amplifier for full range external speakers or "satellites", as well as a
number of additional components to control and process the audio signal.
Main features:
10" powered subwoofer integrated into the enclosure, 150 WRMS
2 x 120 WRMS stereo amplifier integrated into the enclosure with Euroblock connectors for
external speakers ("satellites")
Stereo audio input with RCA and Euroblock connectors
Adjustable subwoofer cutoff frequency: low-pass filter frequency between 100 and 150Hz
Subwoofer phase switch
MASTER VOL and SUB VOL level controls
0-10VDC ports for volume remote control, compatible with the WPmVOL wall panel
ON / STANDBY, Signal Present, CLIP L and CLIP R indicators
4

Publicité

Table des Matières
loading

Table des Matières