Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
Open the package and get out the items.
Look at the printer's manual to setup the ink's ribbon and
labels.
Plug-in the Male connector of the RS-232 cable into the printer
and the female connector to the autoclave.
Plug-in the power cable and power on the printer.
Push three time the "feed" button to let the optical labels
sensor to align.
Power on the autoclave and push the "Setup" button.
Select the item "External Printer" and enter into the sub-menu.
Set the "Kind" field to "Traceability".
Then select "Print Test" and the autoclave will start printing a predefined label.
If the print is right then the setup procedure has been completed.
BarCode: Serial
Number and Cycle
number
Expiry date of the
sterilization process
LAYOUT OF THE TRACEABILITY LABEL
1
ENGLISH
Cycle type
Publicité
