Hinkley Quick Fit 80100QF Instructions

CONVERT ALL OF THESE RECESSED CAN LIGHT PRODUCTS
Manufacturers
Halo
Lightolier
Lithonia
Juno
Progress
Thomas
Nora
L&C Lighting / Seagull
L&C Lighting / Utilitec
W.A.C.
Seohyun International / Quantus
Elite
Elco
Capri
Jimway / Cammercial Electric
Luminaire: LUICT-0
Prescolite
Utilitech
HINKLEY LIGHTING 33000 Pin Oak Parkway
Recessed Light Converter Instruction - 80100QF - QuickFit
WARNING: Risk of re or electric shock. Disconnect power to existing luminaire at breaker box.
Luminaries' wiring, ballasts, or other electrical parts may be damaged when drilling for installation of the
converter kit hardware. Check for enclosed wiring and components. Do not alter, relocate, or remove
wiring, lampholders, ballasts, of any other electrical components. Install in 4" to 6" recess can luminaires
that have the construction features and dimension as shown in the drawings on page 2 of this instruction
sheet. To prevent wire damage, do not expose wiring to edge of sheet metal or other sharp objects. The
Recessed Light Converter Kit can be installed on inclined ceilings. Mount only on listed new construction
cans with bar hangers. Do not use this product in a pop in can (see illustration). DO NOT install on t-bar
suspended ceilings. 50 lbs. max. load rating for luminaires. Not intended for luminaires greater than 50 lbs.
Model No.
EI400AT, H99ICT, H99T EL99, H99ICAT,
H5ICAT, H5T, H5ICAT, ET500, EI500AT,
H25ICAT, H7T, HI7T, H7ICT, H7ICAT,
H7TNB, H7ICTNB, H7ICATNB, H27T,
H27ICT, H27ICAT, ET700, ET2700,
EI700U, EI700UAT, EI700AT, EI700NB,
EI700ATNB, EI2700, EI2700AT
1004IC, 1004ICN, 1004ICNQ, 1004ICQ,
1004SIC, 1004SICN, 1104IC, 1104ICN,
1104ICNQ, 1104ICQ, 1104SIC, 1104SICN
L3R6, L5, LC6, LCP, LU6, LUP, L7, L7X,
L7XP, LICJ
IC2, IC2W, IC20, IC20N, IC20S, IC20NW,
IC20W, IC21, IC22, IC22S, IC22W, IC23,
IC23W, TC2, TC2S, TC2W, TC20, TC20S,
IC1, IC1S, IC1W, IC1P, TC1, TC1S
P821-AT, P821-FB, P821-FBFC, P84-AT,
P85AT, P85 -FB, P85-TG, P86-TG, P87AT,
P645-AT, P83, P88, P830-TG, P831- AT,
P831-FB, P816-TG, P817-AT
PS1, PS3, PS5SH, PS9, PS5, PS5, PS7IC,
PS4, PS4ASIC, R4, R4ASIC
NH-26Q, NH-27Q, NHIC-27Q, NHIC27QAT,
NHIC-17/100/AT, NHIC-17QAT,
NHIC-17QNBAT, NHIC-17/100/DW,
NHIC-17/100/DWQAT, NH-501Q, NHIC-
501QAT, NS-401Q, NS-401QAT, NSIC-
401AT
1106, 1107, 1108, 1110,1128, 11028,
11019, 1119, 11007, 11107, 11128,
11119, 1105, 1179
LWSIC1
R5VI-ICA, R5VI-S-ICA, R6VI-ICA, -
R6VI-S-ICA
R-500-N-UA, R-602D-N-ICA, R600D-N-A,
R-660S -N-A, R-402S-N-ICA, R-400S-NA
82-200IC
B4, B4IC, B5IC, B5IC-AT, B6, B6IC,
B6ICAT, B26, B26IC
R5H, EL5IC, EL5ICA, EL7IC, EL7ICA,
EL7ICAT, EL7ICWA, EL7IC100,
EL7IC100A, EL99
R4, R4ASIC, R5, CR1, CR1QP,
CR1NB,
CR1NBQP, R9ASIC, CR5, CR5QP,
PR1
C7 (H5), C7IC (H1), C7ICA (H3),
HBR5000SIC (H21), CAT7ICATA,
HBR5ICAT, CER105, HBR2000BICAT,
HG2000BA
LUICT-00
BX5, IBX5, IBX5S, IBXHW, IBXS, FT5,
FT6, SCIBX, IBX4-120, BX4-120, FT4
Y7, Y7ICAT
Avon Lake, OH 44012
Note: This recess light converter kit is designed to support a luminaire
with a maximum weight that can be supported by your recess can or
50 lbs., whichever is less. Not intended for use with ceiling fan. The
converter kit installation requires knowledge of lighting luminaires
electrical system. If not quali ed, do not attempt installation. Contact
a quali ed electrician.
Part
(p)800.442.5539 / (f ) 440.653.5555
PARTS INCLUDED
Description
Outer Section for
Channel Brace (C)
Inner Section for
Channel Brace (D)
Inner Lock Bar (E)
Crossbar Mounting Bracket (F)
#8-32 x 1/4" Center Screw (G)
#8-32 x 5/16" Side Screw (H)
Washer (I)
#8-32 x 3/16" Gound Screw (J)
Green Ground Wire with screw (K)
Bare Copper Wire (L)
Socket Pigtail (M)
1" Self Piercing Screw (N)
#8-32 x 1/2" Fixture Screw (O)
www.hinkleylighting.com