hawa Powerman 2684-7100-01-01 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating instructions Powerman
Contents
1.
Introduction
2.
Safety requirements
3.
Handling of the equipment
3.1
3.2
3.3
4.
5.
6.
7.
8.
9.
Thanks for your decision to purchase the Powerman Kompact. The installation manual will provide a detailed description on how to operate the
equipment safely.
Please treat this document with care and make sure that it is read, understood and followed by all operating personnel.
2. Safety requirements
Machinery with moving parts always bears the risk of bodily injury and requires specific caution and carefulness.
To minimize the risk, please read this manual carefully before operating this equipment.
this equipment may only be operated in faultless condition
variations have to be reported to the supervisor immediately
the work environment has to be tidy
the work place has to be well illuminated
hydraulic hose must not be bent. Be aware of tripping hazards
potentially leaking oil (leak) has to be cleaned up immediately
operating personnel is required to wear proper safety apparel (gloves, antislip work shoes, safety glasses)
work at the machine is prohibited if concentration could be affected (e.g. through drugs or alcohol)
keep away children
The equipment is not designed and intended for any other work than described in this manual. In the case of misapplication,
we will not be reliable for any resulting damages.
For damages, provoked by improper installation or non-compliance of the safety requirements, häwa GmbH can not be made liable.
Attention: Keep proper footing and balance at all times. Do not lean over the punch tools. If they break during operation, due to misapplication, the
operator could be struck by fragments causing injury.
Warning: Do not perforate live enclosure or in the vicinity of any live parts.
3. Handling of the equipment
The hand pump compact is state-of-the-art and in accordance with the relevant safety regulations at time of placing on the market, and with regards to
its intended application.
We reserve technical modifications as part of further developments of the machine.
Powerman 2684-7100-01-01
5

Publicité

Table des Matières
loading

Table des Matières