Publicité
Les langues disponibles
Les langues disponibles
Before starting
1.
Ensure the impeller cover is closed and the impeller
release is tightened. Without the impeller cover tightly
closed, the blower/vac cannot be started.
2.
Ensure the collection bag is attached. See Fig. 5.
3.
Plug the blower/vac into the power supply and switch on.
Starting the Blower/Vac
Select either the Vacuum or Blower function using the selector lever
on the side of the machine and press the on/off trigger. If more
power is required, slide the speed controller from position 1 to
position max. See Fig. 6.
Speed controller
WARNING: Before selecting either Vacuum or Blower function,
ensure that the selector lever operates smoothly and that it is not
obstructed by debris from previous use.
Stopping the Blower/Vac
To turn off the machine, you can simply release the on/off trigger.
Using the Blower/Vac
Do not attempt to pick up wet debris, allow fallen leaves etc. to dry
out before using the Blower/Vac. The Blower can be used to blow
debris from patios, paths, driveways, lawns, bushes and borders.
The Vacuum will pick up leaves, paper, small twigs and wood clip-
pings. When using the Blower/Vac in Vacuum mode, the debris is
drawn up through the vacuum tube and shredded by the mulching
blade before being ejected into the collection bag. The shredded
organic debris is ideal to use as mulch around plants.
WARNING: Any hard objects, such as stones, tin, cans, glass, etc.,
will damage the fan and blade. Do not use the Blower/Vac to
vacuum water or very wet debris. Never operate the Blower/Vac
without the impeller cover tightly closed.
OPERATING
HEIGHT ADJUSTMENT
Press the height adjusting button (A) and slide the Vacuum/Blower
tube (B) to desired length. It can be extended up to a length of 30".
See Fig. 7.
Fig. 5
AUXILIARY HANDLE ADJUSTMENT
Adjust the auxiliary handle to a comfortable angle. Release the
adjusting button and the handle will lock automatically. See Fig. 8.
RAKE ADJUSTMENT
Rotate the rake knob 90 degrees counter-clockwise and then the
rake will automatically pop up. Lock the knob by rotating 90°
degrees clockwise. See Fig. 9.
Fig. 6
OVERHEAT PROTECTION
If the Blower/Vac is blocked by a foreign object or if the motor is
overloaded, the motor will switch off automatically by the protection
device. Release the trigger and wait for the motor to cool down
(approx. 15 minutes) before starting the Blower/Vac again.
5
Adjusting Button
Fig. 9
Fig. 7
Fig. 8
Publicité
