KLASS Fan KOOKAI Manuel D'utilisation page 22

9
Mount the canopy by tightening the two screws.
10
- Remove the three screws and the LED from
lamp.
- Align the lamp holder's screw holes with those
on the motor and attach both parts by means of
the screws provided.
- Connect the LED light's wires to the fan motor's
wires.
Use the lamp fixture removed screws to tight
the LED.
- Carefully install the glass shade into the main
body and turn it clockwise to lock it.
WARNING: Do not over tighten when installing
the glass shade.
20