WOLFF FRASMASTER 230 V Traduction Du Mode D'emploi Original page 8

EN
Translation of the original operating instructions
Grooving machine FRÄSMASTER
Dear Customer
You have chosen to purchase the TURBO-STRIPPER -
the right choice when it comes to quality and
performance.
This operating manual contains important instructions
for operating the machine.
Attention!
Please read this operating manual carefully, and
ensure that all users read this manual before
operating the machine.
Observing the safety instructions protects against
situations that may endanger health and safety
and helps to prevent improper use of the machine.
Ensure that you are confi dent operating the machine
before commencing work.
During operation is too late!
Do not allow persons to operate the machine if they
do not possess the necessary expertise to do so.
Legend
Important instructions relating to safety and damage
prevention are indicated in this operating manual by
the following symbols.
Important instructions
Warnung
Warning of general danger
Wear safety glasses
Wear hearing protection
Read the instructions/notices
Special waste
8
1.0 Product description
Important components of the machine
The numbering of the product features refers to the illust-
ration of the machine on the graphics page 2.
1 Manifold
2 Clamping nut
3 Dust bag
4 Handhold
5 Guiding roll
6 Cover
7 Knife roll
Please refer to the graphics on pages 2-4 while you read
the operating instructions.
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standard-
ization documents:
DIN EN 1037, EN ISO 12100, DIN EN 60204-1,
DIN EN 60745-1,DIN EN 60745-2-22,
DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the:
2006/42/EG, 2004/108/EU, 2006/95/EU.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the
gathering of the technical documentation.
08.02.2018 i.V.
Uzin Utz Tools GmbH & Co.KG | 74360 Ilsfeld | Ungerhalde 1