Publicité
10
CM Series
CM Series Controls
(1)
(5)
(6)
(7)
(8)
(1)
(5)
(6)
(7)
(2)
(3)
(10) (11) (12)
(2)
(3)
(9)
(10)
(11)
(12)
(13)
Controls
(4)
(13)
(14)
(4)
(14)
(1) INPUT VOLUME – Adjusts the volume of
(11)
MIC/LINE SWITCH – Optimizes the input gain
the various audio sources. Each channel
for mic or line-level sources.
has an associated LED that will light green
(12)
RCA INPUTS – Allows the connection of
to indicate active signal, and light red to
stereo unbalanced sources, which will be
indicate clipping.
summed to mono.
(2) EQ KNOBS – Adjusts the bass and treble for
(13)
PRIORITY – Additional 2 pins that activate
the master output(s).
the priority function when shorted together.
(3) MASTER VOLUME – Controls the overall
(14)
VOX KNOB – Sets the input level that will
output level. The associated LED(s) will light
engage the priority ducking function.
green to indicate active signal, and light red to
indicate amplifi er limiting/protection.
(4) POWER BUTTON – Turns the unit on and off .
The LED will indicate power status.
(5) MAINS CONNECTOR – Connect the IEC cable
to a mains outlet.
(6) OUTPUT – Send the mixed audio to a
power amplifi er.
(7) REMOTE – Allows the connection of an
external volume control module per channel.
CRC-V series of wall controllers are available as
separate accessories.
(8) INPUT ROUTING – Controls the routing and
phantom power for each channel. (CM82 only)
(9) 48 V SWITCH – Sends 48 V of phantom
power to any Euroblock inputs set to MIC.
(CM41 only)
(10)
EUROBLOCK INPUT – Accepts 3-pin
Euroblock connectors for balanced mic or
line-level sources.
Quick Start Guide
11
Publicité
