Publicité
Les langues disponibles
Les langues disponibles
USING INSTRUCTION
Display Description
There are three buttons on the instrument, power button
,upshift button
and
downshift button
.
This icon shows the remaining capacity of the battery.
The power will be turned off automatically if the scooter is not used for 5 minutes.
to change the mileage representation, 'odo' shows the
Short press the power button
cumulative mileage, 'dis' represents the mileage after the power is on. Once you turn the
power off 'dis' will be reset.
If a fault occurs, the display will show the part of the fault, brake failure
, motor failure
, accelerator failure
, controller failure
Riding
Press Upshift Button and Downshift Button to adjust speed level(3 levels available).
Press the accelerator button to accelerate.
6
Publicité
