Acessing The Wapploxx Control For The First Time - Abus wAppLoxx Control 505272 Guide De Démarrage Rapide

Accessing the wAppLoxx Control for the first time
It is recommended to always check and use the latest Firmware version of the wAppLoxx Control,
which can be downloaded here: www.abus.com/uk/wapploxx
English
Password prompt
• An administrator password is defined for the wAppLoxx Control
prior to delivery, however, a new password should be defined
immediately for security reasons. The wAppLoxx Control requires
a valid user name and password to be entered each time it is
accessed.
• The administrator account factory settings are configured as
follows: user name "administrator" and password "12345678".
• To enter a user name and password, proceed as follows: open
Internet Explorer and enter the IP address of the wAppLoxx Control
(e.g. "http://192.168.0.50").
• You will then be presented with an authentication prompt.
After the password has been entered successfully, you will be
taken to the wAppLoxx Control administration page. You can find
more information in the user instruction manual via the link:
www.abus.com/uk/wapploxx
27