Fisher-Price Kid-Tough Mode D'emploi page 25

Problem
Photos are blurry
Cannot transfer
pictures to the
computer
Product functions
erratically or does not
function at all
Troubleshooting
Cause
Lens may be dirty or smudged
Camera moved when picture
was taken
Flash may not have been charged
You are too close to your subject
USB cord may not be
properly connected
Static electricity may temporarily
stop the electronic function of the
camera and cause picture loss.
For example, walking across the
rug and touching the camera may
create static electricity
Batteries are weak or
exhausted
Solution
Clean the lens with a soft cloth.
Try to keep the camera steady when you
take pictures.
Wait for flash to fully charge before you take
a picture .
The focus range is from about 1,2 m (4 ft.)
- infinity
Check cord connections on both your
camera and your computer.
Reset the electronics by removing the
batteries and putting them back in the
battery compartment.
Replace the worn batteries with four, new
"AAA" (LR03) alkaline batteries.
25