Display Modes - AKO Electronica AKO-15740 Manuel D'utilisation

3.- Operation

3.1.- Display modes

There are four possible modes for displaying instantaneous input readings. Press P
various modes:
Individual input information
Input
reading
Description
of the input
Displays the reading of a certain input on full screen. Press N
Sequential input information
Displays on full screen the reading of all active inputs one after the other.
Input
reading
Description
of the input
List of inputs
Displays a list of all the unit's inputs (whether active or not) and their readings. To scroll through the list, press N
Description
of the input
Summary of inputs (only AKO-15740 and AKO-15742)
Displays a summary of the readings of all inputs whether active or not (does not display the description).
Input No.
Probe failure
or O
or Q
to change the input to be displayed.
Alarm status
R
(
Input reading
>
Input disabled
T Alarm signal delayed
<
=
Input
reading
Input
disabled
to toggle between the
or Q
.
Alarm relay enabled
Alarm signal enabled
Alarm signal silenced
Maximum alarm
Minimum alarm
22