Troubleshooting - Belkin CarAudio Connect AUX Guide D'utilisation

TroUbleshooTIng

sections
table of contents
You can quickly solve most problems with your CarAudio Connect AUX
by following the advice in this section.
The audio is not coming out of the stereo speakers.
Solutions:
• Make sure both the car stereo and the CarAudio Connect AUX are
powered on.
• M ake sure the audio cable is correctly and firmly connected to the
aux-in jack of your vehicle.
• Make sure your car stereo is set to the AUX input setting.
• Make sure the stereo volume is set to a comfortable listening level.
M ake sure that your iPhone, iPod touch, or other Bluetooth -enabled
•
device is connected via Bluetooth to the CarAudio Connect AUX.
CarAudio Connect AUX
1 2
Trouble with pairing
Solutions:
•
•
•
11
3 4
M ake sure you press and hold the button until the light blinks orange
(about six seconds).
M ake sure yoone's Bluetooth is turned ON and set to Search mode.
I f you previously paired to a CarAudio Connect AUX, clear the
previous pairing from your phone's device listt.
5 6