Niko 360-37000 Manuel D'utilisation page 13

360-37000
Read the complete manual before attempting installation
and activating the system.
1. DESCRIPTION
The Power Pack 360-37000 is a stabilised 24V DC power supply
with a built-in relay function (10A). It is designed for connection
with a motion sensor with an NPN output. The Power Pack is
designed for DIN rail mounting and is used in combination with
the 350-20110/350-20111 dualtech motion sensor. The motion
sensor controls the DC power supply for switching the lighting
on and off.
2. INSTALLATION
Wiring diagram: fig.1. If constant lighting is required, you can connect
a switch/relay. To one Power Pack 360-37000, max. 2 dualtech
motion sensors 350-30110 can be connected in parallel or max.
1 dualtech motion sensor 350-20111.
Cabling
3 x 0.75mm
2
3 x ø 1.0mm
3 x ø 0.8mm
3 x ø 0.6mm
3 x ø 0.4mm
Accessoires
Motion sensor 350-20110/350-20111
EN
max 100m
max. 100m
max. 50m
max. 25m
max. 15m
13