Ovislink KVM-104+ Guide D'installation Rapide page 4

OPERATION:
1. First turn on the monitor followed by the PC with KVM Switch, the other PC.
2. Make sure each PC is boot-up completely before switching the KVM Switch.
HOT-KEY:
To activate the scan mode (Auto Status):
+
Scroll Scroll
Lock Lock
To desactivate the scan mode (Manual Status):
- Press any key on the Keyboard
To activate the scan mode (Auto Status):
(SELECT PC1)
+
Scroll Scroll
Lock Lock
Repeat step 2 for PC's2, 3 and 4
TROUBLE SHOOTING:
* The reason for not compatible with Auto KVM Switch.
1. The BIOS in the mother board.(Basic Input / Output System).
2. The hardware equipment. (Keyboard. Mouse)
3. Software. OS (Operating System)
2
+
Space Bar
+ 1 +
Enter