Publicité
EN
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
h)
Keep packaging elements and small assembly parts
in a place not available to children.
i)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device may be used by children over 8 years of
age and persons with limited mental, sensory and
mental functions or lacking adequate experience
and/or knowledge, provided that they are supervised
by a person responsible for their safety or have
received instructions from that person on how to
operate the device safely and they understand the
risks involved.
c)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
d)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
Do not leave this appliance unattended while it is in
use.
h)
Clean the device regularly to prevent stubborn grime
from accumulating.
8
i)
Do not cover the air intake and outlet.
j)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
k)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
l)
Keep the device away from sources of fire, heat and
direct sunlight
m)
Before and after use, always empty the tank and
clean the vacuum cleaner to avoid accumulation of
substances which may cause a fire inside the device.
n)
During use, check the hoses and the device for
overheating. If you notice signs of overheating, turn
the device off and let it cool down.
o)
Do not use the device with no filter installed.
p)
Do not move the device when the clamps are
unlocked, as this may cause damage to the device
q)
Always unplug the device when it is not in use. This
will eliminate the possibility of electric shock or fire
due to damaged device insulation.
r)
Do not place metal objects in the electrical outlet of
the device as this may lead to electric shock.
s)
Do not pull or lift the device by pulling it by the hose,
as this may cause the device to fall or damage the
hose.
t)
Move the device only by holding the handle.
u)
Do not use the device to vacuum embers or
flammable objects such as cigarettes/gasoline/
printing ink/solvent, etc.
v)
Do not tilt the device when there is water in the tank
because the motor can be damaged.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is designed for dry and wet vacuuming.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
7
6
8
5
4
3
9
2
1
10
08.06.2022
1.
Tank holder
2.
Suction inlet
3.
Locking clamp
4.
Device head
5.
Extension tube
6.
Main handle
7.
Suction hose
8.
Motor switches I, II and III
9.
Tank
10.
Drain pipe
3.2. PREPARING FOR USE
Keep the device away from hot surfaces. Always use the
device on an even, stable, fireproof and dry surfaces.
Make sure that the device power supply matches its
nameplate specifications!
Before starting work, make sure that:
•
a filter bag or a HEPA filter is installed in the device
•
closed latches properly fix the head of the device to
the tank
•
main handle and castors are properly mounted in
the body of the device.
•
the container is stably seated on the base and fitted
with latches on the transverse shaft at the back of
the base.
Mounting the main handle
1.
Slide the main handle upper tube into the main
handle lower tube
.
2.
There are 3 rows of holes (
,
,
) in the main
handle bottom tube
for adjusting the height of
the handle. Adjust the handle upper tube
to the
desired height and secure the handle using the knob
and nuts
.
3.
When using the tilt function to clean the tank of the
device, set the handle
height to the lowest position
while the knobs should be in the holes
.
1
6
2
3
4
7
5
Assembling the castors
1.
Put the
castors onto the
, axel and secure them
with the parts
. Set the assembled set of parts
and
in position
that makes it possible to mount
the castor axel to the undercarriage of the device.
2.
Use screws
to secure the fasteners
.
3.
Fix the castors
and the part
in the holes
.
08.06.2022
9
EN
6
4
5
3
1
7
2
8
9
In order to ensure proper operation, the accessories must be
correctly connected to the suction hose:
3.3. DEVICE USE
1.
Connect the hose to the appropriate port as needed
(suction or blow) according to the hose port
instructions.
2.
Connect the vacuum cleaner to the power supply.
3.
Switch from 1 to 3 motors depending on the suction
power you prefer. The more motors work, the greater
the suction power.
4.
Start vacuuming.
5.
After finishing working with the vacuum cleaner:
a)
Switch off all vacuum cleaner motors.
b)
Disconnect the vacuum cleaner from the power
supply.
c)
Disconnect the flexible hose, pipe and pipe end.
Clean these parts.
d)
Remove the head. The description of how to
dismantle and install the head can be found later in
this chapter.
e)
Clean the tank with a soft cloth.
f)
Remove, wash and dry the filter. The cleaning method
is described later in this chapter.
How to connect/disconnect the flexible hose
To connect the hose to the inlet, insert the hose end into
the inlet and turn it. To disconnect the hose from the inlet,
turn the tip and pull out the hose.
,
How to disassemble and assemble the head
1.
Turn the vacuum cleaner off and unplug it.
2.
Unclip the locking clamps and lift the head of the
device by pulling the carrying handle.
3.
Remove the filter bag / unscrew the knob protecting
the HEPA filter in position and remove the HEPA filter.
Publicité
