Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

USB 7131
Portable handy audio system
Many thanks for purchasing this US Blaster product.
Always read the safety instructions below before letting a professional install this equipment.
MAGNETIC FIELD
CAUTION! Do not locate sensitive highgain equipment such as preamplifiers or tape decks directly
above or below the unit. Because this amplifier has a high power,it has a strong magnetic field
which can induce hum into unshielded devices that are located nearby. The field is strongest
just above and below the unit.Locate the amplifier(s) in the bottom of the rack and the preamplifier
or other sensitive equipment at the top.
CAUTION!
Risk of electric shock. Do not open.
To prevent electric shock do not remove top or bottom covers.No user serviceable parts inside.
Refer servicing to qualified servicing personnel.Disconnect power cord before removing back panel
cover to access gain switch.
WARNING
To reduce the risk of electric shock,do not expose this equipment to rain or moisture!
WATCH FOR THESE SYMBOLS
The exclamation point trian-
gle is used to alert the user
to important operating or
maintenance instructions.
© US Blaster Europe BV
The lighting bolt triangle is
used to alert the user to
the risk of electric shock.

Publicité

loading

Sommaire des Matières pour US Blaster USB 7131

  • Page 1 USB 7131 Portable handy audio system Many thanks for purchasing this US Blaster product. Always read the safety instructions below before letting a professional install this equipment. MAGNETIC FIELD CAUTION! Do not locate sensitive highgain equipment such as preamplifiers or tape decks directly above or below the unit.
  • Page 2 Frequency response: 80Hz - 20KHz • Rated power: 60W • Nominal Impedance: 8 ohms • Each speaker with 1 speakon and 2 1/4"jacks connectors • Cabinet with handle and 2 wheels • Each cabinet with internal stand hole © US Blaster Europe BV...
  • Page 3 © US Blaster Europe BV...
  • Page 4 One 1/4 (6.35mm) jacks for you to connecting a speaker cabinet, the min impedance is 4 ohms. 5.Left speaker output One 1/4 (6.35mm) jacks for you to connecting a speaker cabinet, the min impedance is 4 ohms. © US Blaster Europe BV...
  • Page 5 Handle: It allow you to easy take away. Speakon: allow you to input amplifier signal 3/4 jack connectors: allow you to input amplifier signal Wheel: It allow you to easy take away. Supplied 1 Power supply cord 2 Operating instructions © US Blaster Europe BV...
  • Page 7 USB 7131 Tragbare handliche Audio-Anlage Vielen Dank, dass Sie dieses Produkt von US Blaster gekauft haben. Lesen Sie stets die fol- genden Sicherheitshinweise durch, bevor Sie einen Fachmann dieses Gerät einbauen lassen. MAGNETFELD VORSICHT! Stellen Sie keine empfindlichen High-Gain-Geräte wie Vorverstärker oder Kassettendecks direkt auf oder unter das Gerät.
  • Page 8 Frequenzgang: 80 Hz – 20 kHz • Nennleistung: 60 W • Nominale Impedanz: 8 Ohm • Jeder Lautsprecher hat 1 Speakon- und 2 1/4"-Anschlussbuchsen • Das Gehäuse hat einen Griff und 2 Räder • Das Gehäuse hat eine Halterungsbohrung © US Blaster Europe BV...
  • Page 9 © US Blaster Europe BV...
  • Page 10 4. Ausgang des rechten Lautsprechers Eine 1/4"-Buchse (6,35 mm) zum Anschluss eines Lautsprechers mit mindestens 4 Ohm Impedanz. 5. Ausgang des linken Lautsprechers Eine 1/4"-Buchse (6,35 mm) zum Anschluss eines Lautsprechers mit mindestens 4 Ohm Impedanz. © US Blaster Europe BV...
  • Page 11 1 Griff: Er erlaubt einen einfachen Transport. 2 Speakon: Ermöglicht den Eingang des Verstärkersignals. 3/4 Anschlussbuchsen: Ermöglicht den Eingang des Verstärkersignals. 5 Rad: Es erlaubt einen einfachen Transport. Im Lieferumfang enthalten 1. NETZKABEL 2. BEDIENUNGSANLEITUNG © US Blaster Europe BV...
  • Page 13 USB 7131 Système audio portable pratique Nous vous remercions d’avoir choisi US Blaster. Lisez toujours les consignes de sécurité ci- dessous avant de faire installer cet équipement par un professionnel. CHAMP MAGNETIQUE DANGER! Ne placez pas d’équipements à gain élevé sensibles tels que des pré-amplificateurs ou des platines de défilement directement au dessus ou en dessous de l’appareil.
  • Page 14 Puissance nominale : 60W • Impédance nominale : 8 ohms • Chaque haut-parleur avec 1 speakon et 2 connecteurs prises 1/4" • Boîtier avec poignée et 2 roues • Chaque boîtier avec trou pour socle interne © US Blaster Europe BV...
  • Page 15 © US Blaster Europe BV...
  • Page 16 4. Sortie haut-parleur droit. une prise 1/4 (6.35mm) pour la connexion au boîtier des haut-parleurs, l’im pédance minimale est de 4 ohms. 5. Sortie haut-parleur gauche. une prise 1/4 (6.35mm) pour la connexion au boîtier des haut-parleurs, l’impédance minimale est de 4 ohms. © US Blaster Europe BV...
  • Page 17 2 Speakon: vous permet d’entrer le signal de l’amplificateur 3/4 connecteurs prise : vous permet d’entrer le signal de l’amplificateur 5 Roulette : vous permet de l’emporter facilement. Fourni 1 CORDON D’ALIMENTATION 2 MODE D’EMPLOI © US Blaster Europe BV...